Steam A Seam 2 Lite | 12" Wide

Steam-A-Seam 2 Double Stick has a pressure sensitive adhesive on both sides which allows for a temporary hold to both your appliqué material and the background material.

You can hold your project vertically and the appliqué pieces stay in place and are still repositionable until fused with an iron. Before fusing, tack your project to a wall or try on a garment to check appliqué placement.

You're able to reposition pieces while you're wearing them. Once fused the bond is permanent.

12" / 30 cms wide. (18" Wide also available).

SKU#: 101916

Steam A Seam 2 Lite | 12" Wide

Steam A Seam 2 Lite | 12" Wide

£8.50
  • Buy 3m for £7.65 each and save 10%
  • Buy 22m for £7.25 each and save 15%
Available to buy in increments of 0.5

Steam A Seam Overview & Instructions

Steam A Seam is supplied sandwiched between two sheets of lining paper.

Trace or draw your shape/pattern onto one side of the backing paper.

Remove one side of the paper backing and press onto the wrong side of your applique fabric the fabric will now be stabilised while the shape is cut out.

Peel off the other layer of paper from the Steam A Seam and your applique can be pressed into place on your main fabric project. Steam A Seam allows you to reposition your fabric shape multiple times without a permanent bond being formed.

Once you are happy with the position simply iron the applique for a permanent hold - spend about 20 seconds pressing with iron on a mid heat setting.

Take a look at full Steam A Seam Instructions.

Cut Lengths

To order simply add metres and/or half metres to your basket – we will cut as one continuous length.

12" / 30cms wide.

18" Wide Steam A Seam also available.

Part of our extensive Haberdashery range.

101916