Lightweight Fusible Wadding Quiltex Vilene - Diamond Fuse

A real cracker! Lightweight, soft wadding/batting with a diamond fusible glue design for instant, quick & easy crosshatch effect.

Just iron the batting onto your fabric to not only add a nice touch of warmth and body but also make cross-hatch stitching remarkably easy (no more marking & measuring lines on your fabric)!

Gives an instant quilted effect. Perfect for jackets and quilts.

Specification:

Width 90cm / 36" wide
Composition 100% Polyester
Roll Length A full roll is 15m

SKU#: E106957

Lightweight Fusible Wadding Quiltex Vilene - Diamond Fuse

Lightweight Fusible Wadding Quiltex Vilene - Diamond Fuse

£7.50 per metre
  • Buy 3m for £6.90 each and save 8%
  • Buy 15m for £6.10 each and save 19%
Add a matching thread?

£4.30

Available to buy in increments of 0.5

Method of use:

Place the batting with the coated side on the wrong side of your fabric.

Press each area using a dry iron for about 10 to 12 seconds, without pushing the iron. Keep an eye on the iron setting, as the delicate threads of the insert can stick to the iron if the temperature is too high.

Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly. The quilting is visible on the insert side; the diamond pattern of the filling serves as both a quilting line and guideline.

Recommended Threads:

For quilting applications stitch with Cotton Quilting Thread.
This is the thread that is included if you decide to 'add a matching thread' above.

For general applications stitch with 120s General Purpose Sewing Thread.

Vilene Code: X50

More Information
Colour White
Brand Vilene / Vlieseline

The manufacturer advises the following care instructions however we always advise testing a small piece first to make sure you are 100% happy.

Washable at 40°
Iron Setting 1-2
Dry Cleanable
Do Not Bleach